Some fixed ladders can’t just be pulled out and replaced. At Melbourne Airport, a set of existing ladders was tied into a larger access structure, so our job was to make them safer without starting from scratch.
Improving height safety doesn’t always mean installing an entirely new system. Plenty of refurbishments can start with a ladder, roof or structure that’s been in place for years, and that’s where our height safety retrofit and upgrade work comes in.
For BGIS, which manages facilities for Qantas, the RISSafety team carried out a height safety system upgrade on existing fixed access ladders at Melbourne Airport in Tullamarine. The ladders had been identified as non-compliant with AS 1657, the Australian Standard for fixed platforms, walkways, stairways and ladders. The catch was that they couldn’t simply be swapped out.
When replacing a fixed ladder isn’t practical
On paper, the answer to a non-compliant ladder is a new one. On a working site, it’s rarely that simple.
These ladders formed part of a larger access structure. Removing and replacing them would have meant significant structural modifications, which is a big undertaking on any operating site.
Those same site constraints meant full AS 1657 compliance wasn’t achievable. But we weren’t willing to leave the client with the existing risk. So, we worked with BGIS to find the most practical way to address it.
The brief
BGIS needed us to:
- Improve the safety of access for people using the existing ladders.
- Provide additional fall protection.
- Make the ladder step nosings easier to see.
- Clearly identify the ladders’ existing limitations and the risks that remain.
Our fixed ladder retrofit
Because the structure was staying, the solution had to work around it. Our ladder systems experience, paired with our specialised engineering and fabrication capability, meant we could build components to suit what was already there instead of forcing an off-the-shelf product to fit.
We made three key height-safety improvements.
1. Ladder cage retrofit
We fitted a custom ladder cage built to suit the existing ladders. A cage encloses the climbing space, so a climber has a barrier behind them as they climb up and down. With a potential fall of more than 15 metres, that extra protection makes a real difference.
2. High-visibility step nosings
We painted the step nosings yellow. It’s a simple change, but it makes each step easier to see and the accessway easier to find and navigate. It also gives the ladders a cleaner, more finished look.
3. Warning signage
Where full compliance isn’t possible, people need to know what they’re working with. We installed warning signage that identifies the ladders’ limitations, so anyone using them understands the remaining risks before they climb.
The result
The new cage has substantially reduced the risk to people using the ladders, particularly given the previous fall potential. Paired with the brighter nosings and warning signage, the access arrangement is now safer, easier to identify and navigate, and anyone climbing knows its limits.
BGIS was very happy with the outcome. They appreciated our ability to develop a practical solution that dramatically improved the safety of the accessway and significantly reduced the existing risk.
Like any height safety system, these ladders will need regular height safety inspections to stay in good working order as the site changes.
Fixed ladder retrofit FAQs
Can an existing fixed ladder be retrofitted instead of replaced?
It can be, but it depends on the structure, the condition of the ladder, how it’s used and the risks identified on site. Each ladder needs its own assessment. At Melbourne Airport, the existing structure was kept, and the ladders were upgraded with a custom cage, high-visibility nosings and warning signage.
What happens if an AS 1657 fixed ladder can’t be made fully compliant because of an existing structure?
The site needs a specific assessment to work out what can realistically be improved. On this project, we put practical upgrades in place to substantially reduce the risk and used warning signage to flag the remaining limitations. This was the right outcome for this site. Different height safety systems consider each site’s unique conditions and limitations, as there isn’t a standard compliance pathway for every ladder.
What improvements were made to the existing ladders?
We fitted a custom ladder cage, painted the step nosings high-visibility yellow and installed warning signage identifying the ladders’ limitations.
Who can design a custom ladder retrofit in Melbourne?
RISSafety designs, fabricates and installs ladder systems, retrofit upgrades and custom access solutions for commercial and industrial sites, including height safety upgrades in Victoria. We start with a site assessment, then build a solution around the existing structure.
Do you have a height safety system that needs an upgrade?
Working with existing structures can bring a whole set of height safety challenges, but not every access problem needs a full rebuild. If you have a fixed ladder that’s been flagged as non-compliant, or a structure that makes replacement tricky, we can look at what’s possible on your site.
Talk to our team about your existing ladder upgrade or ladder safety in Melbourne and wider Victoria.