Free shipping Australia-wide for all products. Shop now 

Roof Safety Systems


The RISSafety SafeRail system is designed, manufactured and tested to meet AS/NZS1891.2 :2001 for rope access fall prevention standard. RISSafety’s SafeRail system consists of rail sections and specifically formed corners, which enable side, overhead or ground based installation of the system to a suitable structure. It can easily be adapted to most construction and environmental conditions.

Our SafeRail has been designed so that the end user can travel from a Vertical position to a Horizontal position on one continuous system without any disconnection. These systems are designed to be used for most industrial environments and specifically Rope Access and Abseiling applications.

The design of rope access systems is undertaken in conjunction with the building or structures owner or representative and is subject to a detailed design and operation considerations and engineering certification for the parent structure.

The benefits of using a rail system over a cable system revolve around the following points.

  • Ongoing maintenance is more affordable as in the unlikely event a section was damaged it can be removed and replaced quickly and cost effectively without the removal of the entire system.
  • Limited deflection in the event of a fall due to the rigidity of the rail in comparison to a cable system.
  • Rail systems can be installed to match building lines and can be designed to disappear into the building meaning they have less impact on the buildings environmental aesthetics.

RISSafety’s SafeRail is manufactured from robust, lightweight, corrosion resistant structural aluminium materials suitable for most common environmental conditions. lt will accommodate multiple users subject to a maximum of 3 users per span, with a maximum radius for the SafeRail bend at 500mm. It can be used for overhead, shoulder, vertical and foot mounted applications. The SafeRail and trolleys are tested to a minimum of 15kN statically in all directions that a load can be applied during proper use.

If you are looking for an independently tested and certified SafeRail system, then get in touch with us today.